HY Industry Corporation Limited

Main Points for Installation of Stainless Steel Handrail Holumn

1. The installation of the stainless steel handrail stanchion should be carried out according to the requirements and the order of the construction ink line upwards from the starting point. The columns at both ends of the platform at the start of the stairs should be installed first. The installation can be divided into welding and bolting methods.


1) During welding construction, the welding rod should be made of the same material as the base material. During installation, the column and the embedded part should be temporarily fixed by spot welding. After the elevation and vertical correction, the welding should be firm.


2) When bolts are used for connection, the holes on the metal plate at the bottom of the stainless steel handrail stanchion should be processed into round holes to prevent the expansion bolts from being inconsistent with their positions. Minor adjustments can be made during installation. During construction, after drilling expansion bolts with electric drill at the base of the installation column, we should connect the column and fix it slightly. If there is an error in the installation elevation, we should adjust it with a metal thin gasket, and tighten the nut after vertical and elevation correction.


After the stainless steel handrail stanchion at both ends are installed, the pull-through wires are used to install the remaining columns in the same way. The stainless steel handrail post must be installed firmly and not loose.


2. The stainless steel handrail stanchion is inlaid with machine glass, glass and other barriers, and the barriers should be installed after the column is completed. The installation must be firm, and the vertical, horizontal and inclination should meet the design requirements.

During installation, the tailgate shall be embedded in the grooves of the vertical poles on both sides. The gaps between the grooves and the two sides of the rails should be filled firmly with hard rubber strips. After the handrails are installed, they should be embedded with sealant. When the handrails are welded and installed, the fence should be covered with fireproof asbestos cloth to prevent welding sparks from damaging the fence.


If you happen to want to buy stainless steel handrail columns, you are welcome to choose HY Industry. Our quality is absolutely guaranteed.

-->